KraftMaid
Shaker
Modern flat-panel
Two-tone cabinets
Cambria quartz
Butcher block
Open shelvingFree design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side
Why Henderson Homeowners Choose KraftMaid Kitchen Remodeling
We provide independent KraftMaid kitchen remodeling, refacing, and repair service in Henderson, NV, handling everything from a single failed drawer bank to a full cabinet replacement with coordinated countertops and fixtures. What sets our KraftMaid work apart is that we know the actual lines installed in this valley – ProSeries, Cherry Creek, Waypoint, and Prelude – and we match each one to the failure it actually develops and the honest fix it deserves. KraftMaid cabinets are built to hold up, but they meet a specific set of conditions in Henderson, and our job is to make sure your kitchen is ready for them.

To be clear about who we are: Kitchen Remodeling Henderson is an independent KraftMaid service provider. We are not affiliated with, authorized by, or acting on behalf of the KraftMaid brand, and we don’t present ourselves as a dealer or factory representative. Our credibility is built on hands-on work with these cabinet systems – installation, refacing, and repair – across the Henderson area, and on our crews’ time in kitchens with the same construction and the same climate. Our technicians have up to 14 years of experience. If you’re pricing a KraftMaid-driven project, call (888) 397-6875 for a free estimate.
Key Takeaways
- We service and install KraftMaid cabinets as an independent provider – cabinet box, doors, glides, and finish.
- We name the real lines (ProSeries, Cherry Creek, Waypoint, Prelude) and the failures each one tends to show.
- Cabinet refacing, replacement, and island work sit in the same scope as countertops and fixtures, so one contractor owns the whole kitchen.
- Your written estimate sets the final price.
Why Trust Kitchen Remodeling Henderson for Your KraftMaid Kitchen Remodeling?
Because KraftMaid cabinets are not all the same product, and the service you need depends entirely on which one is in your kitchen. A ProSeries box with a particleboard carcass and a thermofoil door has different limits than a Cherry Creek plywood box with solid wood doors and a stained finish. Treating them the same is how kitchens get the wrong fix. We approach every KraftMaid job by identifying the construction first – box material, door style, glide platform, and finish type – then choosing a repair path that protects what’s still sound.
We use quality parts that fit KraftMaid equipment. When the cabinet box is square and solid, we source replacement doors, drawer fronts, and glides that match the original footprint, and we use quality hinges and glides that hold up to daily use. We don’t claim to stock or sell genuine KraftMaid parts, and we won’t tell you a manufacturer part is in play when it isn’t. What we do promise is that the parts we install fit correctly, function smoothly, and keep your warranty intact. Service work done to the manufacturer’s standards, without drilling or modifying the cabinet in ways that void coverage, is how warranty-safe practice works in practice. Our technicians have up to 14 years of experience reading exactly these signals, and that’s what we bring into your Henderson kitchen.
Styles & brands we work with
- Shaker
- Modern flat-panel
- Two-tone cabinets
- KraftMaid
- Cambria quartz
- Butcher block
- Open shelving
Common KraftMaid Kitchen Remodeling Problems We Fix in Henderson
These are the failures we see most often on KraftMaid cabinetry in Henderson kitchens. Each has a real cause, and each has a fix that doesn’t always mean tearing out the whole run.
- Thermofoil door delamination on ProSeries and Prelude. The edges of the door peel and lift, usually first near the dishwasher and sink. Heat and moisture cycling inside a working kitchen slowly loosens the laminate-to-core bond, and once an edge lifts, the damage spreads. The door front is the failure, not the box – so door replacement or refacing is often the right call.
- Drawer glide failure on older KraftMaid units. Side-mount epoxy-coated rollers wear down and lose their smooth travel, especially in wide pot drawers that carry real weight. Drawers sag, bind, or drop out of alignment. The box is usually fine; the glide platform is the weak point.
- Face-frame joint separation and hinge screw pull-out on Cherry Creek and Waypoint. Years of dry Nevada air cycling and heavy daily use work the joints and the hinge screws. You see gaps at the frame, doors that don’t sit flush, or screws that no longer bite. Reinforcing the frame and re-anchoring the hinge is a repair, not a replacement.
- Finish cracking and yellowing on painted Prelude and Waypoint doors. Direct sunlight through west-facing windows is brutal in Henderson. Painted finishes fade, crack, and yellow over time, and the UV load through an unshaded window accelerates it. Refinishing or a new door set restores the look without replacing the cabinet structure.
- Caulk failure at the counter-to-wall seam. Dry heat and low humidity crack the caulk line where the countertop meets the wall, opening a gap that grows through a Henderson summer. It’s a small fix, but it’s a maintenance reality of desert kitchens, and it’s worth addressing before it lets moisture in behind the counter.
KraftMaid Parts & Our Repair-vs-Replace Approach
We source replacement doors, drawer fronts, and glides that fit KraftMaid cabinetry when the cabinet box is sound, and we switch to quality aftermarket soft-close undermount glides and hinges when the original parts are discontinued or cost more than they’re worth. We don’t claim to stock genuine KraftMaid parts, and we won’t pretend a part is OEM when it’s a quality fit. What we do is honest: if the box is structurally sound and square, refacing or door replacement is usually the right call for failed thermofoil or finish – full replacement only when the box integrity or the layout is compromised. That’s a judgment built on seeing a lot of KraftMaid boxes in this climate, not on bending you toward the bigger ticket.
For most Henderson homeowners, the real question is how much of the original cabinetry is salvageable. When it is, we save it. When it isn’t, we say so plainly. Call (888) 397-6875 to talk through your options – estimates are free, and the written estimate sets the final price.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We identify the KraftMaid construction in your kitchen – box material, door finish, glide platform – and trace the failure to its cause. A peeling door and a sagging drawer often share a source, and we want the right one.
- 2
Repair or install. We reface, replace doors or glides, reinforce frames, or install new KraftMaid cabinetry, using parts that fit and functions that hold. Countertops and fixtures are coordinated in the same scope when the project calls for it.
- 3
Test. Every drawer bank, door, and hinge gets opened, closed, and loaded under working conditions before we call it done. No drawer leaves the job binding or sagging.
- 4
Warranty and documentation. We confirm the work was performed in a way that protects your manufacturer coverage and hand over what you need to keep. Warranty-safe practice means no shortcuts that void it later.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Henderson
We work on the full KraftMaid cabinet system: the cabinet box, the doors and drawer fronts, the glide and hinge hardware, and the finish. That covers installation of new KraftMaid cabinetry, refacing an existing run, replacing failed doors, upgrading drawer banks to soft-close undermount glides, and repairing face-frame joints and hinge anchor points. We also handle the countertops and fixtures around the cabinets so the finished kitchen is coordinated, not matched by eye after the fact. Whether your kitchen is a 1990s tract home in Green Valley with original thermofoil, or a fuller build, we install and service the cabinetry to fit the room. Call (888) 397-6875 to schedule your free estimate.
We Also Service These Brands
Our kitchen work isn’t tied to a single cabinet brand. We also install and service Wellborn cabinetry, and we work with three premium surface lines – Cambria and Silestone are the ones Henderson clients ask about most – alongside Kohler, Moen, and Blanco fixtures. That range means we can recommend the cabinet and surface that fit your kitchen and your budget, rather than steering you toward whatever we happen to carry. One contractor, full kitchen scope.
FAQs – KraftMaid Kitchen Remodeling Service in Henderson
No. We are an independent KraftMaid service provider, not authorized, affiliated with, or acting on behalf of the manufacturer. Our work is built on hands-on familiarity with KraftMaid cabinet construction, not on any manufacturer certification or dealer status. Call (888) 397-6875 to discuss what your kitchen needs.
Yes. We use replacement doors, drawer fronts, glides, and hinges that fit KraftMaid cabinetry correctly, and we’re clear about whether a part is a quality fit or a discontinued original. We don’t claim to stock genuine KraftMaid parts, and we won’t misrepresent one. Estimates are free – call (888) 397-6875.
Most single-item repairs – a failed drawer bank, a hinge re-anchor, a door swap – are a short job; a refacing or full cabinet installation takes longer and depends on the size of the run and current lead times. The written estimate lays out the expected timeline before work starts. Call (888) 397-6875 to book your estimate.
We cover the cabinet system end to end: boxes, doors and drawer fronts, glides, hinges, face frames, and finishes, including installation, refacing, and repair. We don’t claim to stock products – we install and service what fits your kitchen. Call (888) 397-6875 for a free estimate.
Not when the work is done to the manufacturer’s standards. Improper modification – drilling or altering the cabinet in ways that breach coverage – can void it, which is why we work within the cabinet’s design and document what we’ve done. We can’t speak for the manufacturer’s decision, but warranty-safe practice is how we approach every job. Call (888) 397-6875 to talk it through.
Typical estimated ranges for the work are below. The written estimate sets the final price, and the estimate is free.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $3,720 – $12,090 |
| Countertop Installation | $1,860 – $6,045 |
| Backsplash Installation | $745 – $2,325 |
| Kitchen Island Installation | $2,790 – $9,300 |
| Small Kitchen Remodel | $8,370 – $18,600 |
| Kitchen Remodel | $13,020 – $41,850 |
Call (888) 397-6875 for an exact quote for your Henderson kitchen – estimates are free.
Often, yes. If the cabinet box is square and structurally sound, replacing the failed thermofoil doors or refacing the run restores the look without tearing out intact cabinetry. A site check confirms whether the box can carry new doors. Call (888) 397-6875 to have it assessed.
Cherry Creek’s plywood box and solid wood doors usually make refacing the smarter call when the structure is sound and the doors are repairable. Replacement makes sense when the box integrity or the layout has failed. An on-site look tells you which. Call (888) 397-6875 for a free estimate.
The likely cause is worn side-mount epoxy-coated rollers plus dry-air cycling and heavy pot-drawer loads – not a structural box failure. Upgrading the drawer bank to quality soft-close undermount glides usually fixes it for good. Call (888) 397-6875 to schedule the repair.
Yes, in most cases. Painted Waypoint doors can be refinished to a new color when the surface is sound, and replacement door fronts are the alternative when the finish has cracked or yellowed beyond repair. The right method depends on the door’s condition. Call (888) 397-6875 for an assessment.
Lead time varies by line, door style, and finish, and it’s confirmed before your order is placed. Refacing a sound run can move faster than a full cabinet replacement, which depends on cabinet production and delivery. Call (888) 397-6875 for a current estimate.
Book Your KraftMaid Service in Henderson, NV
If your KraftMaid kitchen needs refacing, replacement, or a repair you can trust, we’re ready to look at it. We’re an independent KraftMaid service provider serving Henderson with cabinet work, countertops, and fixtures under one contract. Call (888) 397-6875 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price.
Written by the team at Kitchen Remodeling Henderson.