Countertop Installation Cost in Henderson - Written Fixed-Price Quotes, Permits Handled

Free on-site estimate and a written, line-item quote before any work begins. One contract, one crew, one accountable point of contact. Licensed, insured, permits handled.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call (888) 397-6875

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
How Much Does Countertop Installation Cost in Henderson, NV? (2026 Price Guide) | Kitchen Remodeling Henderson
ShakerShaker
Modern flat-panelModern flat-panel
Two-tone cabinetsTwo-tone cabinets
KraftMaidKraftMaid
Cambria quartzCambria quartz
Butcher blockButcher block
Open shelvingOpen shelving
Every visit starts with

Free design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side

We have financing partners for your dream kitchen
Get your free estimate
Explore

Styles & brands we work with

  • Shaker
  • Modern flat-panel
  • Two-tone cabinets
  • KraftMaid
  • Cambria quartz
  • Butcher block
  • Open shelving
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Countertop Installation Cost in Henderson?

Countertop installation in Henderson typically costs between $1,860 and $6,045, with most kitchens landing in the middle of that range once material, square footage, and edge profile are chosen. A small galley kitchen with a standard quartz top sits at the low end; a larger layout with a waterfall island, premium stone, and a full backsplash pushes toward the top. The written estimate we prepare after measuring your kitchen sets the final price, so what you see here is a realistic planning figure, not a quote.

Key Takeaways

  • Typical countertop installation in Henderson runs $1,860 to $6,045, including material and labor.
  • Surface brand and slab size drive most of the price swing, not the install itself.
  • Cambria, Silestone, and Caesarstone give you three premium quartz lines to compare on finish, thickness, and edge.
  • We handle countertops alongside cabinets from KraftMaid and Wellborn and fixtures from Kohler, Moen, and Blanco, so nothing falls between trades.
  • Free estimates: call (888) 397-6875. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Countertop Installation Cost Breakdown (2026)

Here’s how the typical estimated range breaks down by line item for a Henderson kitchen. These are planning figures, not a quote – your written estimate after on-site measurement is what sets the price.

Line item Estimated range
Countertop installation (material + labor, standard kitchen) $1,860 – $6,045
Cabinet installation (often paired with a countertop job) $3,720 – $12,090
Backsplash installation $745 – $2,325
Kitchen island installation $2,790 – $9,300
Small kitchen remodel (cabinets + surfaces + fixtures) $8,370 – $18,600
Full kitchen remodel $13,020 – $41,850

Where your number lands inside the countertop range depends mostly on the surface you choose and how much of it you need. A single-slab kitchen with standard overhang and an eased edge sits near the bottom. A larger kitchen with a waterfall island face, a double-thick edge, and cutouts for a Kohler sink and Moen faucet climbs toward the top. If your countertop job runs alongside new cabinets or a redesigned island, the cabinet and island ranges above are useful context – we quote all three so you’re not guessing across separate vendors.

What Affects Countertop Installation Pricing in Henderson

Every Henderson kitchen is a little different, and a handful of factors decide where you fall in the range. Here are the ones that move the number most.

  • Surface brand and slab size. Cambria, Silestone, and Caesarstone each carry their own pricing band, and a jumbo slab costs more than a standard one. Bigger kitchens and kitchen islands need more slab, which is the single largest cost driver.
  • Edge profile and thickness. A standard eased edge is simplest. A mitered or double-thick edge, or a waterfall island face, adds fabrication time and material.
  • Cutouts and sink style. A Blanco undermount sink requires different cutout and finish work than an overmount, and a faucet placement like a Moen pull-down changes where holes land on the slab.
  • Removal of the old top. Tearing out a laminate or tile top, and handling any tile adhesive or underlayment, adds labor. Old countertops don’t come off cleanly in every case.
  • Cabinet condition and leveling. A new countertop only sits right on a level, solid cabinet run. If your cabinets are sagging or out of square, we’ll flag that before templating – it’s one of the coordination points that’s easy to miss when separate vendors handle the job.
  • Layout complexity. L-shaped, U-shaped, and peninsula layouts mean more seams, more cuts, and more templating time than a straight run.

Which Surface Fits Your Budget?

We work with three premium quartz and stone brands: Cambria, Silestone, and Caesarstone. Each one has its own look and its own price band, and being able to compare all three side by side, rather than visiting three separate suppliers, keeps the decision simple.

Cambria is American-made and family-owned, and its patterns tend to lean toward realistic stone looks with tight consistency slab to slab. Silestone and Caesarstone cover a wide spread of finishes and thicknesses, so you can match a budget without giving up the look you want. If you’re pairing new surfaces with new cabinetry, KraftMaid and Wellborn both carry manufacturer-backed limited lifetime warranties and quality standards that builder-grade box-store lines don’t match. Choosing cabinets and countertops together, from one company, means the slab is sized to the cabinet run and the edge detail lines up with the cabinet finish – no gap between what the cabinet installer planned and what the countertop fabricator assumed.

If your project also involves new cabinet boxes, our kitchen remodeling Henderson page walks through how the full scope fits together. For homeowners across the Henderson area, that single-contractor approach is the reason most of our clients start with a countertop and end up coordinating cabinets and fixtures in the same plan.

How to Save on Countertop Installation

Countertop pricing is set by material and fabrication, so the way to save is to make choices that reduce both. A few practical moves:

  • Measure your usable counter line before you shop. Knowing your square footage keeps you from paying for more slab than you need.
  • Choose a standard edge. An eased or small bevel edge costs less than a mitered or waterfall profile and looks clean on most kitchens.
  • Compare all three quartz lines. Cambria, Silestone, and Caesarstone each have entry patterns that won’t blow the budget. Being able to compare them in one place, without three store visits, saves you time and keeps the numbers comparable.
  • Bundle the scope. If you’re also replacing cabinets or a backsplash, quoting countertops, cabinets, and fixtures together means fewer change orders and no overlap-priced labor between separate trades.
  • Keep the sink and faucet in the same plan. Specifying a Kohler sink and Moen faucet alongside the countertop prevents re-cut surprises after the slab is set.

Free estimates make the first step easy: call (888) 397-6875 and we’ll walk your kitchen, measure, and put a written number in front of you. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

What Does a Countertop Installation Job Involve?

A typical Henderson countertop installation runs in stages. First comes templating – a precise measurement of your existing cabinets and any cutouts for the sink and faucet. Then the slab is fabricated to those measurements at a stone shop. On install day, the old top comes off, the cabinets are checked for level, and the new surface is set, seamed, and finished. Sink and faucet connections are made the same day where the plumbing is already in place, and any necessary caulking and edge finishing wraps it up.

Because we handle cabinets, countertops, and fixtures as one scope, the templating step happens with the same team that will set the cabinets and finish the faucet. That’s the difference between a coordinated install and one where a countertop fabricator shows up to find the cabinet run was never leveled. Our technicians have up to 14 years of experience reading exactly those gaps before they become change orders.

Countertop and Backsplash: Should You Do Both?

Most Henderson homeowners pair a new countertop with a new backsplash, and doing them together usually costs less than two separate jobs. A backsplash installation runs $745 to $2,325 on its own, and when it’s quoted alongside the countertop the two are measured and installed to line up without a gap at the seam.

The material choice matters here. A quartz backsplash in the same Cambria, Silestone, or Caesarstone pattern as your counter creates a continuous look. A tile backsplash lets you bring in a different texture. Either way, planning the backsplash in the same scope means the counter edge, the backsplash height, and the cabinet finish all land where they should.

Does a New Countertop Require New Cabinets?

Not always, but the two decisions are connected. A new countertop sits on your existing cabinet boxes, so if the boxes are solid and level, you can replace just the surface. If the cabinets are sagging, out of square, or the old top was hiding damage, cabinets from KraftMaid or Wellborn become part of the conversation. Cabinet installation in Henderson runs $3,720 to $12,090, so it’s worth knowing that number before you decide.

We install KraftMaid and Wellborn because both carry manufacturer-backed limited lifetime warranties and their own quality standards – brands you can hold accountable, not builder-grade lines that fail quietly. If you’re replacing cabinets and countertops together, quoting them in one scope keeps the slab sized to the boxes and avoids the classic mismatch between a cabinet plan and a countertop plan made by two different vendors.

Does a New Countertop Change the Island Cost?

It can. A kitchen island installation runs $2,790 to $9,300, and if the island gets a new top, that top is priced as part of the countertop job. An island with a waterfall face, a prep sink, or an overhang for seating adds fabrication and material. Islands are also where surface choice shows most – a large uninterrupted slab in Cambria, Silestone, or Caesarstone makes a strong visual statement, but a jumbo slab costs more than a standard one.

Planning the island surface and the island cabinet together means the overhang, the sink cutout, and the finish line up. It’s the kind of detail that gets missed when the island cabinet and the island top come from two separate companies.

Fixtures: The Part Most Countertop Quotes Leave Out

A countertop quote covers the slab and the install, but the sink and faucet are part of the same surface. We spec and install Kohler, Moen, and Blanco sinks and faucets alongside the countertop so the cutout, hole placement, and finish all line up. Each of those brands carries its own product warranty, which protects you beyond the installation itself.

If you’re choosing a Blanco undermount sink, the cutout and edge polish are different from an overmount, and that affects fabrication time. A Moen pull-down faucet changes where the holes land on the slab. Getting the fixture decision made before fabrication prevents re-cutting a finished slab, which is the expensive kind of surprise.

Frequently Asked Questions About Countertop Installation Cost

How much does countertop installation cost in Henderson?

Countertop installation in Henderson typically costs $1,860 to $6,045, including material and labor. Where you land in that range depends on surface brand, slab size, edge profile, and whether old countertops need removal. Call (888) 397-6875 for an exact quote – estimates are free.

Is it cheaper to repair or replace a countertop?

Replacing is usually the better value for a worn or damaged top, since a repair rarely fixes an underlying problem like a sagging cabinet or a failed seam. A full replacement in Henderson runs $1,860 to $6,045, and a new surface resets the whole kitchen. Call (888) 397-6875 and we’ll tell you honestly whether repair makes sense for your top.

How much does a quartz countertop cost in Henderson?

A quartz countertop installation in Henderson falls within the $1,860 to $6,045 range, with Cambria, Silestone, and Caesarstone each carrying its own band. Larger kitchens and islands need more slab, which raises the number. Call (888) 397-6875 for a written estimate on your specific layout.

Can you install a countertop the same day?

Same-day service is possible for smaller jobs where the slab is already fabricated and the cabinet run is ready. Most installations involve a templating visit first, so the full job spans more than one visit. Call (888) 397-6875 to talk through your timeline. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Do you handle cabinets and countertops together?

Yes – cabinets from KraftMaid and Wellborn, countertops from Cambria, Silestone, and Caesarstone, and fixtures from Kohler, Moen, and Blanco are all handled by one company. That single scope reduces the coordination failures that show up when separate specialty vendors handle each piece. Call (888) 397-6875 for a free estimate that covers the full kitchen scope.

Get a Free Countertop Estimate in Henderson

If you’re planning a countertop project in Henderson, the fastest way to a real number is a free estimate. We’ll measure your kitchen, talk through Cambria, Silestone, and Caesarstone options, and show you how the countertop, cabinets, and fixtures fit into one coordinated scope. Our technicians have up to 14 years of experience, and every estimate is written and upfront. Call (888) 397-6875 today. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Pricing reflects the Henderson market as of 2026. Kitchen Remodeling Henderson offers free estimates – call (888) 397-6875.

What Our Customers Say

★★★★★ 4.7 from 10+ reviews

"Full gut, moved the sink to the island which meant plumbing and electrical under the slab, and the whole thing took nine weeks against a nine week estimate. The cabinet install is dead level everywhere I've put a level."

- Tim Barrett

"Very happy with the result. The dust control could have been better in the first week before they got the barrier up properly."

- Beatriz Martinez

"Found out the wall I wanted opened was load bearing. He priced the beam properly and pulled the permit rather than quietly cutting it and hoping."

- Rachel Lawson
Need Kitchen Remodeling help in Henderson? Licensed & insured · free written estimates
Call (888) 397-6875

Request a Free Estimate

Tell us what's going on in Henderson. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7