Last updated November 17, 2026
Shaker
Modern flat-panel
Two-tone cabinets
KraftMaid
Cambria quartz
Butcher block
Open shelvingFree design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side
Kitchen Remodeling Cost Breakdown: The Henderson Homeowner’s Reference for 2026
Most kitchen cost guides you’ll find were assembled from data out of Phoenix, Los Angeles, and Dallas, then averaged into a single national number that means almost nothing on a Henderson street. That $77,000 “mid-range” figure making the rounds doesn’t reflect Clark County labor rates, doesn’t account for cabinet freight into the valley, and doesn’t tell you why the same Cambria slab fabricated here lands at a different installed price than it would in another metro. This reference breaks down what a kitchen actually costs in Henderson in 2026, by scope and by material tier. You’ll get cabinet pricing by grade, a surface comparison that includes fabrication math, the real cost of permitted plumbing and electrical changes, and where homeowners here overpay versus under-budget. No padded “it depends.”
Quick Answer
A kitchen remodel in Henderson in 2026 typically runs from roughly $32,000 for a cosmetic refresh with semi-custom cabinets and a quartz countertop up to $115,000 or more for a full gut remodel with full-custom cabinetry, premium stone, and relocated plumbing and electrical. The single biggest lever on your total is cabinet tier, followed by surface selection and how much you change the existing plumbing and electrical layout. Every figure in this guide is an estimate; your written, line-item quote sets the final price.
Styles & brands we work with
- Shaker
- Modern flat-panel
- Two-tone cabinets
- KraftMaid
- Cambria quartz
- Butcher block
- Open shelving
Table of Contents
- What does a kitchen remodel cost in Henderson by scope?
- How much do cabinets cost by tier in Henderson?
- Surfaces compared: Cambria, Silestone, Caesarstone, and granite
- What do plumbing and electrical changes cost when permitted in Clark County?
- Where Henderson homeowners overpay and under-budget
- How much contingency should a Henderson remodel hold?
- How long does a Henderson kitchen remodel take?
- Frequently asked questions
What does a kitchen remodel cost in Henderson by scope?
The cleanest way to price a kitchen in Henderson is by scope, because scope determines which trades are involved and whether permits and inspections come into play. Below are typical estimated ranges for the three scope levels we see most. These are estimates for planning; the written estimate on your specific kitchen sets the final number.
- Cosmetic refresh (no layout change): roughly $32,000 to $55,000. New cabinets in a semi-custom line, a quartz countertop, a sink and faucet upgrade from a line like Moen or Blanco, new backsplash, and paint. Plumbing and electrical stay where they are, so no permits for relocation.
- Mid-scope remodel (minor layout shifts, new island): roughly $55,000 to $85,000. This is where a new island circuit, a relocated sink, or a swapped range position enters the picture and permitting becomes part of the plan. Surfaces climb to the premium tier and cabinet runs get longer.
- Full gut remodel (walls opened, service upgraded): roughly $85,000 to $115,000 and up. Cabinets can go full-custom, stone goes slab-to-slab, and electrical service or panel work is commonly folded in.
Where the scope sits on that ladder has a lot more to do with your total than brand choices. A semi-custom cabinet installation in a well-planned cosmetic refresh will out-value a full-custom layout that was poorly planned every time. If you’re still deciding whether you’re remodeling or rebuilding, start with the scope question before you shop a single slab. Our Kitchen Remodeling Henderson page walks through how we structure a project around those three tiers so the budget stays matched to the work.
How much do cabinets cost by tier in Henderson?
Cabinets are the largest single line in most Henderson kitchen budgets, often 35 to 45 percent of the total. The reason cost guides mislead here is that they quote national per-linear-foot medians that ignore freight into the valley and the difference between builder-grade box-store lines and brand-name lines with their own manufacturer warranties. Below is installed cost per linear foot by tier, with labor at Henderson-area rates.
- Stock cabinets: roughly $150 to $280 per linear foot installed. Limited sizes, limited finishes, and the fit usually demands filler strips. Fine for a rental or a tight budget, but the gaps and the short warranty show.
- Semi-custom cabinets (KraftMaid, Wellborn): roughly $320 to $560 per linear foot installed. This is the sweet spot for most Henderson homeowners doing a meaningful remodel. Semi-custom means the cabinet box is built to your dimensions with the finish and storage you choose, and the manufacturer backs it with a limited lifetime warranty. We install KraftMaid and Wellborn because they hold their tolerances and their warranty stands behind the product, not just the install.
- Full-custom cabinets: roughly $600 to $950 per linear foot installed. Every dimension is drawn to the room. Worth it in a historic or unusually shaped kitchen; overkill in a standard-track layout.
One local detail that national guides skip: cabinet freight into Henderson adds to installed cost because the valley is a regional delivery point, not a manufacturing hub. That freight is baked into the per-foot figures above rather than billed separately. For a closer look at how the semi-custom lines compare box-for-box, see our guide to kitchen remodeling.
The 2026 cabinet decision in one line
If you’re remodeling once and staying, semi-custom KraftMaid or Wellborn is almost always the right call in a Henderson home. The step up from stock buys you a real fit and a real warranty. The step up to full-custom only pays if your room’s dimensions genuinely require it.
Surfaces compared: Cambria, Silestone, Caesarstone, and granite
Surface pricing in Henderson is driven by two things most guides flatten into a single per-square-foot number: the slab price itself and the fabrication and install labor, which depends heavily on slab yield. A large Henderson kitchen with a long island and an L-run can get efficient yield from a single slab, which brings the installed per-square-foot cost down; a choppy layout with lots of cutouts wastes slab and pushes it up. Below are typical 2026 installed ranges by material.
- Cambria quartz: roughly $75 to $120 per square foot installed. American-made and family-owned. Non-porous, consistent, and backed by the manufacturer’s own warranty. The premium tier for a reason.
- Silestone quartz: roughly $65 to $105 per square foot installed. Broad color range, strong stain and scratch resistance, and a slightly wider price band depending on the collection.
- Caesarstone quartz: roughly $70 to $110 per square foot installed. Known for the design-forward finishes and consistent slab-to-slab color.
- Granite: roughly $55 to $95 per square foot installed. Natural stone, so every slab is unique. Requires periodic sealing, and the color you fall in love with on a sample may vary on the delivered slab. That variability cuts both ways on cost.
The point isn’t to crown a winner. It’s that having Cambria, Silestone, and Caesarstone available through one contractor lets you compare material, finish, and thickness side by side instead of driving between suppliers and reconciling three different quotes. Slab yield is where a good fabricator earns their keep; ask how many slabs your layout needs before you commit. If you want to see the surface lines side by side, our Henderson service page lays out what we carry.
What do plumbing and electrical changes cost when permitted in Clark County?
This is where a lot of kitchen budgets blow up, because the two most expensive words in a remodel are “while we’re in there.” Moving a sink or adding an island circuit means the work crosses into permitted territory through Clark County, and inspection is part of the timeline. What that adds in cost:
- Relocating a sink drain: roughly $900 to $2,200. The drain has to slope correctly to the existing stack, which sometimes means opening flooring. Cheap on a plan, real on a site.
- Adding an island circuit (outlet or appliance): roughly $600 to $1,800 depending on whether the panel has room for a spare breaker. If the panel is full, the number climbs.
- Electrical panel upgrade to support new appliances: roughly $2,500 to $5,500. A full panel replacement when the existing one won’t carry a new induction range or double oven.
- Permit and inspection fees: these vary by scope and are itemized in the written estimate. We pull the permits and hold the inspections so you’re not chasing signatures down at the county.
Older homes in Anthem and Green Valley are where this bites hardest. Pre-2000 construction often has panel capacity that was fine for the appliances of the era and is marginal for a 2026 kitchen. If your home is in that range, budget for the possibility before you fall in love with a 48-inch range. For the full picture of how a kitchen remodeling project sequences permitted work, that page walks through it.
Where Henderson homeowners overpay and under-budget
In our experience, the overpay and under-budget patterns in this market are remarkably consistent. The line items people overspend on tend to be the visible ones; the ones they underfund are the invisible ones that determine how the kitchen holds up.
Where homeowners routinely overpay
- Hardware. Pulls and knobs get over-specified while the cabinet box underneath is builder-grade. The hinge and the drawer glide matter far more than the finish on the pull.
- Appliance upgrades beyond the layout’s needs. A pro-style range on a panel that can’t carry it is money spent twice.
- Design flourishes that don’t survive the climate. Certain finishes and open-grain wood treatments weather hard in Henderson’s dry heat and hard water. Overpaying for a finish that ages badly is the most expensive mistake on the list.
Where homeowners under-budget
- Ventilation hoods. The hood is routinely under-budgeted relative to its impact on cabinet longevity. Cooking grease and moisture that isn’t captured end up coating cabinet faces and degrading the finish. A properly sized hood protects the cabinetry you just spent 40 percent of the budget on.
- Water conditioning at the sink. Henderson’s hard water leaves scale on quartz and dulls a faucet finish. If there’s no softener in the house, plan for filtration or conditioning at the sink so the surface and fixtures hold up.
- Contingency. See the next section. Most homeowners hold too little.
How much contingency should a Henderson remodel hold?
Hold 10 to 15 percent of your total budget as contingency for a cosmetic refresh, and 15 to 20 percent for a full gut in an older Henderson home. That’s not padding; it’s what pays for the surprises behind the drywall so the project doesn’t stall while the budget gets reworked.
In Henderson specifically, the two contingency-eaters are electrical and plumbing. Older homes in Anthem and Green Valley are the most likely to hide a panel that’s at capacity and plumbing that needs a partial re-pipe once the original tile comes off. Both are discoverable only once the walls are open. The good news is that a well-run project budgets for the possibility up front rather than treating it as a change order. A fixed price with no change orders is one of the things we stand behind; contingency is your buffer for scope you and your contractor agree to add once the wall is open, not a fee added after the fact.
When we quote a cabinet installation in an older home, we plan for the panel and plumbing question in advance. If you’re weighing whether a refresh or a full remodel makes sense, our Kitchen Remodeling Henderson overview covers how scope and contingency are set before work begins.
How long does a Henderson kitchen remodel take?
A Henderson kitchen remodel runs about 4 to 8 weeks for a cosmetic refresh and 10 to 16 weeks for a full gut remodel, with permitted plumbing and electrical inspection adding time to the schedule. Here’s how the weeks break down:
- Design and selection (2 to 4 weeks): cabinet line, surface, fixtures, and layout finalized. Pulling permits happens here so the clock starts on the county’s review.
- Demolition and rough-in (1 to 2 weeks): tear-out, then plumbing and electrical rough-in. Inspection gates the next phase.
- Cabinets and surfaces (2 to 4 weeks): cabinet boxes set, then template, fabrication, and install of the countertop.
- Fixtures and finish (1 to 2 weeks): sink, faucet, backsplash, paint, and punch list.
The single biggest schedule variable in Henderson is slab lead time and fabrication, followed by how quickly the county inspection slot comes up on permitted rough-in. Our Henderson service page lays out the local steps if you want the schedule in more detail.
See the difference
Before
After
Before
After
Before
AfterCommon Mistakes to Avoid
- Buying cabinets before the layout is finalized. Cabinet size is a function of the room’s dimensions; buying first forces filler strips and gaps into a space that didn’t need them.
- Skipping the panel check before picking appliances. A new induction range or double oven on a panel with no spare capacity turns an appliance choice into a five-figure electrical scope.
- Under-budgeting the hood. Ventilation protects the cabinetry. A weak hood quietly degrades a finish that cost 40 percent of the budget.
- Assuming the surface is just the slab. Fabrication and slab yield drive installed cost as much as the material. A choppy layout wastes slab; ask about yield before you sign.
- Holding no contingency in an older Henderson home. The panel and the plumbing behind the tile are the two things most likely to surface once walls open. Plan for them.
- Coordinating three vendors instead of one. Cabinets, countertops, and fixtures sourced and installed by separate specialty vendors is where scope gaps and change orders hide. One contractor for the full kitchen scope closes that gap.
- Choosing finishes for looks alone. Dry heat and hard water are hard on certain finishes and fixtures. A finish that ages badly is the most expensive choice on the list.
When to Call a Professional
Call a professional when your project crosses into permitted plumbing, a new electrical circuit, panel work, or a load-bearing change – those aren’t weekend tasks, and the inspection is what protects your resale later. Call when you’re choosing a premium surface and want the slab yield and fabrication planned before you commit. Call when your home is pre-2000 and you’re weighing a full gut against a refresh. And call when you want a single point of accountability from cabinet box to faucet finish instead of managing three vendors. Our technicians have up to 14 years of experience on full-scope kitchens. Kitchen Remodeling Henderson offers free estimates in Henderson – call (888) 397-6875. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Frequently Asked Questions
A kitchen remodel in Henderson in 2026 typically runs $32,000 to $55,000 for a cosmetic refresh, $55,000 to $85,000 for a mid-scope remodel with a new island or relocated sink, and $85,000 to $115,000 or more for a full gut with custom cabinetry and premium stone. These are estimates; your written line-item quote sets the final price. Call (888) 397-6875 for an exact quote – estimates are free.
For most Henderson homeowners doing a meaningful remodel, yes. Semi-custom KraftMaid and Wellborn boxes are built to your dimensions with the finish and storage you choose, and each is backed by a manufacturer-backed limited lifetime warranty. The step from stock buys you a real fit and a real warranty; the step to full-custom only pays if your room’s dimensions require it. We install both because they hold their tolerances.
All three are premium quartz with strong stain and scratch resistance and their own manufacturer warranties; the difference is design, color range, and price band. Cambria is American-made and family-owned and sits in the premium tier at roughly $75 to $120 installed per square foot, Silestone runs about $65 to $105, and Caesarstone about $70 to $110. Having all three through one contractor lets you compare material, finish, and thickness side by side. Call (888) 397-6875 to see samples and get an exact quote.
Yes, relocating a sink drain or adding an island circuit crosses into permitted territory through Clark County, and inspection is part of the timeline. Relocating a sink drain typically adds $900 to $2,200, and an island circuit runs about $600 to $1,800 depending on panel capacity. We pull the permits and hold the inspections as part of the written estimate. Call (888) 397-6875 for a quote on your specific layout.
Not for the scope in your written line-item estimate. The one thing a written estimate can’t foresee is what’s behind a wall – a panel at capacity or plumbing that needs a partial re-pipe in an older Henderson home. That’s what contingency is for, and it’s the buffer you and your contractor agree to before any added scope is priced. The written estimate sets the price for the scope it covers. Call (888) 397-6875 for a free estimate.
A Henderson kitchen remodel runs about 4 to 8 weeks for a cosmetic refresh and 10 to 16 weeks for a full gut, with permitted inspection adding time to the schedule. Design and selection take 2 to 4 weeks, demolition and rough-in 1 to 2, cabinets and surfaces 2 to 4, and fixtures and finish 1 to 2. Slab lead time and the county inspection slot are the biggest variables. Call (888) 397-6875 to schedule a free estimate.
The Bottom Line
Henderson kitchen costs in 2026 are driven by scope and material tier, not national averages. Cabinets are the biggest line and semi-custom KraftMaid or Wellborn is the right call for most homes. Surface pricing depends on slab yield as much as material, so plan fabrication before you commit. The cost most guides miss is the permitted plumbing and electrical work, and the two places homeowners under-budget are ventilation and contingency. Hold 10 to 20 percent depending on scope and the age of the home. One contractor for the full kitchen scope closes the gap where change orders hide. Our technicians have up to 14 years of experience, and we take on cabinets, countertops, and fixtures together so nothing falls between them.
Ready for a real number on your Henderson kitchen? Call (888) 397-6875 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written, line-item quote with fixed pricing, permits pulled, and inspections passed.
Written by the team at Kitchen Remodeling Henderson.